NC printing net dryer Textile Drying Machine with electrical heating or steam heating

KD-200 NC printing net dryer

Product use:

This machine is mainly used to dry after NC printing, it is the newest product which imitated from GERMAN Thies. It has low noise, small recycle air-speed to dry. It can save energy, the fiber after drying can get perfect hand-feel, and without staining.

The process flow

  Net-belt infrared correction → front head stock → 1st drying oven 70 → 2nd drying oven 80 → 3rd drying oven 90(after you setting the temperature, the machine can auto-control the temperature, the recycle fan AC adjustment.) → rear head stock to outlet  → yardstick inspecting and winding machine is cared by users.  → finishing product

mechanical structure

   Front head are welded by12# channel steel and 8mm steel plate

   Correcting: supported by Φ50mm guide net tube, 2 end are mounted by bearing and bearing seat.

   Chamber: frame is welded by 8# channel steel.

   Door: edge bended and welded by 1.2 cold forming steel plate, insulation layer are made by asbestos fiber, door sealing are made by silicon rubber, hinge connect together.

   Temperature controlled valve: automatic temperature controlled valve, or silicon control temperature(electrical heating)

   Frequency convertor: brand WoLu

   Circulation fan unit: use axial-flow type circulation fan, fan blade are casted by Al alloy, and both dynamic and static balance are adjustment, motor’s brand is WanNan

   Radiator: made by Φ25×2 seamless steel tube and 0.5mm Al belt. Good performance.

   Net belt: use glass fiber high temperature net belt, surface coated by Teflon material, not staining ink

   Cabinet: use 1.2mm cold draw steel plate, L×W×H:400×550×1100mm

   Electrical element: Brand Chint, power wire, cable, channel is free.

   Painting material: use green painting or other color appointed by customer.

   Out dimensions: L×W×H:7580×3000×1600mm

Remark: electrical heating or steam heating chosen by customer, for electrical heating: speed 1-2m/min, start first chamber; speed 3.4m/min, start first and second chambers; speed over 4m/min, start all chambers.